Bedford CF-UK Message Board Logo [Home] [Search] [FAQ]
Bedford CF-UK Message Board > CF Questions > tappet adjustment screws
[Private Message] [Register] [Profile] [Member list] [Log-in]
Who's Online:
There are 0 member(s), and 1 guest(s) online.
 
[Printable Version] [Post Reply]
Author Message
Anon
Deleted
Posts :
Location :
Status    : Offline

tappet adjustment screws

Hi, I have been trying to get my cf250 back on the road so decided to change all engine gaskets.
but let the tappets fall out, now I went to reset the clearance and found a few problems being that the adjustment screws(not all)had been rounded off where the allen key goes so I cant do it.

so my question is where can I get some adjuster screws?

regards Paul
Tue 18 Mar 2014 @ 18:53 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

tappet screws

Hi,You could try A Bailey in Leeds.He is not cheepCheers,Jim,

----------------------

Tue 18 Mar 2014 @ 21:17 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

Thanks for the reply, I think I might have found some just waiting on the guy to get back in touch. as for Mr bailey I only deal with him when I'm desperate for a part.

you don't happen to know anyone who could sort me out with some brake pipes for cf250 swb 2.3 1982 with drums all round?

Paul
Tue 18 Mar 2014 @ 21:56 Edit this messageQuote this messagePMQuote this message
Gethin
Card Holder
Posts : 462
Location : east lancs
Status    : Offline

Brake pipes can be made up by your self if your able to

this is the cheapest way of making then..

other wise its means using a piece of string and follow the pipe from union to union. this can then be measured out and 20mm or 1/2" added depending which measurement system your using,

jotting all this down then either go down your local factors and ask if they can make you up them pipes... REMEMBER though that you need imperial fittings not metric unions fitted...

if you still cant find any then get back to me and I will price up the cost of a set for you so long as you can measure the pipes exactly....


they will need to be gently bent to the correct shape when their fitted though
Tue 18 Mar 2014 @ 22:13 View Gethin   Email Gethin   Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

Thanks thats a great help
maybe ill be able to get it back on the road soon I hope.

Paul
Wed 19 Mar 2014 @ 14:05 Edit this messageQuote this messagePMQuote this message
bluebedouin
Global Moderator
Posts : 2444
Location : Northampton,England.
Status    : Offline

This thread should help in putting things back together.11567

----------------------

Wed 19 Mar 2014 @ 17:07 View bluebedouin   Email bluebedouin   Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

Hi, Thanks bluebedouin that makes things a lot easier thanks
ill update once I get her purring.

Thanks again
Paul
Sat 22 Mar 2014 @ 10:40 Edit this messageQuote this messagePMQuote this message
Anon
Deleted
Posts :
Location :
Status    : Offline

Where did you get your small tappet screw from?

Thanks in advance
Tue 30 Sep 2014 @ 09:40 Edit this messageQuote this messagePMQuote this message
bluebedouin
Global Moderator
Posts : 2444
Location : Northampton,England.
Status    : Offline

I can't find anything online in a quick search but if you try your local motor factors they might be able to source for you.

----------------------

Tue 30 Sep 2014 @ 11:36 View bluebedouin   Email bluebedouin   Edit this messageQuote this messagePMQuote this message
Time in GMT
[Post Reply]
New posts since your last visit Administrative Functions: Open/Close/Delete Thread / Move Thread
Old post

Forum Jump:

Back to the CF-UK Homepage ][ Email CF-UK

Powered by FunkBoard vCF0.74c