Anon
Deleted
Posts :
Location :
Status : Offline
|
Adjustments.
Hi to all,
On our return journey the exhaust seemed to be getting a bit noisey,
so today I thought I would take a look and sure enough the bolts at the front pipe flange were loose.
They were far too long and had been shortened by added nuts and washers, so they were hacksawed off and replaced, now nice and quiet.
Then replace one wiper blades rubber, and adust offside wheelbearing, check upper and lower ball joints, and adjust front brakes or maybe that should be try to free off the brake adjusters,
huh, rusted solid, have a can of coke, no not to drink, to free off the brake adjusters, dam good stuff that, wonder what they put in it, maybe just to stop the can from rusting on the inside.
Doug.
----------------------
|
New posts since your last visit
Old post
