![]() |
[Home] [Search] [FAQ] |
---|---|
[Private Message] [Register] [Profile] [Member list] [Log-in] |
Who's Online: |
There are 0 member(s), and 1 guest(s) online. |
[Printable Version] [Post Reply] |
Author | Message |
---|---|
Anon Deleted Posts : Location : Status : Offline |
Bedford engine. Hi to all,After my journey to and from Moffat with oil pressure worries I have decided to make use of an old Bedford CF slant engine I bought three years ago for spare parts and have it re-bored to 20 thou. over-size fit new pistons to it and have the crank-shaft re-ground with under-size big and main bearing shells, then fit it as a short block to breath new life into the Bedford. Dropped off the block and crank-shaft in Dundee at the company called engine resource yesterday and after having a chat with the boss there came away with some old Bedford training manuals he said he would never use again. The work they are doing for me will cost around £1,400 inc. vat, all I will have to do is rebuild and fit the engine, they are going to try and find me a new oil pump or get my old one rebuilt. doujoy ---------------------- |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Bedford engine. Hi to all,Quite a good start to that short engine rebuild the block has been bored out to 40 thou oversize and the pistons have been ordered at £90.00 each, crank-shaft has been ground at 10thou off the mains and 20 thou off the big-ends. The company Engine Resource have managed to find me a band new oil pump all be it at a price £372.00 OUCH, but if the job is worth doing it is a must. All ready have a clutch and fly-wheel and a head set and sump set so I should be able to stay within the £1,500 doing the rebuild and engine change myself. doujoy ---------------------- |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Testing time. Hi to all,Just finished building and testing another non-return valve for the oil pick up pipe on the rebuilt short block that will find its way into my Bedford CF, and it works well just using an old power steering pump to do the test.+ The engine should be ready to be collected in two weeks time, or at least the parts of it will I can then rebuild it myself. doujoy ---------------------- |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Arsonist visit. Hi to all,Arsonist torched my Bedford CF on Tuesday 31st at twelve minutes past four in the morning, CCTV has picked up some pictures of the guy first trying to light my trailer and then setting fire to the Bedford. Hope to rebuilt and repair so if anyone has a spare grill or a throttle cable or any wiring loom sections that would be a great help. Just got the short block rebuilt and ready to be fitted at a cost of £1600 including a new oil pump at a cost of £416 pounds. doujoy ---------------------- |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Damage survey Hi to all,The damage survey is still on going after the fire in the engine bay but I have managed to find some of the parts I will need to get back up and running for next year. doujoy ---------------------- |
![]() | ![]() ![]() ![]() |
Anon Deleted Posts : Location : Status : Offline |
Fire damaged looms. Hi to all,I am looking for wiring layout for the engine bay looms following the fire which has destroyed a large section of the engine wiring. doujoy ---------------------- |
![]() | ![]() ![]() ![]() |
bluebedouin Global Moderator Posts : 2444 Location : Northampton,England. Status : Offline ![]() |
Mr D.S.Joyce. wrote: Arsonist torched my Bedford CF on Tuesday 31st at twelve minutes past four in the morning, CCTV has picked up some pictures of the guy first trying to light my trailer and then setting fire to the Bedford. ... Bloody hell,Doug!What a ![]() ---------------------- |
![]() |
![]() ![]() ![]() ![]() ![]() |
bluebedouin Global Moderator Posts : 2444 Location : Northampton,England. Status : Offline ![]() |
Mr D.S.Joyce. wrote: Hi to all,
I am looking for wiring layout for the engine bay looms following the fire which has destroyed a large section of the engine wiring. doujoy Former club member,Abodator posted this Wiring Diagram on his webpage. I would recommend viewing it on a pc as it's extremely large! ---------------------- |
![]() |
![]() ![]() ![]() ![]() ![]() |
bluebedouin Global Moderator Posts : 2444 Location : Northampton,England. Status : Offline ![]() |
I've made a pdf of that jpg & uploaded it to dropbox.The link to which is here. ---------------------- |
![]() |
![]() ![]() ![]() ![]() ![]() |
Time in GMT |
[Post Reply] | |
![]() |
Administrative Functions: Open/Close/Delete Thread / Move Thread |
![]() |
Back to the CF-UK Homepage ][ Email CF-UK
Powered by FunkBoard vCF0.74c